Télécharger Imprimer la page

Parkside Performance PPAHS 40-Li A1 Mode D'emploi page 45

Publicité

S i
i
1. Release either the safety s itch 
or the on o s itch 
2. Wait until the product has stopped
before placing it down.
3. Remove the battery packs 
the product if you are leaving the
product unattended or if you have
nished orking
˜ Checking the charging level
of the battery packs on the
product
Press the
 button 
o
panel 
.
5 ]
[
The charging level of the battery
 
packs 
is indicated by illumination
9 ]
[
of the corresponding LEDs on the
charging level indicator 
During operation, the charging
 
level of the battery packs 
permanently displayed on the
charging level indicator 
Colour
Red, orange, green Fully charged
Red, orange
Red
harge the battery packs 
o
only the red LED on the charging
level indicator 
[
˜ Transport
S itch o the product and remove
o
the battery packs 
parts come to a complete stop.
Always transport the product with
o
the blade encasing 
Always carry the product by the
o
handle 
.
8 ]
[
[
]
.
7 ]
[
from
[
9 ]
on the control
[
]
.
[
]
is
[
9 ]
.
[
]
Meaning
Half charged
Needs to be
charged
when
9 ]
[
is illuminated.
]
. Let all moving
9 ]
[
.
[
]
˜ Cleaning, care and storage
WARNING! Risk of injury due to
m
unintentional start-up!
Protect yourself when performing
u
maintenance or cleaning work.
S itch o the product and remove
u
the battery packs 
Have any repair and maintenance
o
work that is not described in these
instructions carried out by our
Service entre see "Service" Only
use original replacement parts.
˜ Cleaning
WARNING! Risk of electric
m
shock!
Never spray down the product with
u
water.
NOTICE! Risk of damage to the
m
product!
Chemical substances may attack
u
the plastic parts of the product.
Do not use any cleaning agents or
solvents.
Keep the ventilation slots, motor
o
housing front handle 
handle 
clean. Use a damp cloth
[
8 ]
or brush to do this.
Cleaning and care of the safety cutter
 
[
2 ]
T
i
o
Cloth
Care oil spray
C
o
Remove any green cuttings that
are stuck.
lean the safety cutter bar 
an oily cloth.
Maintain the safety cutter bar 
with a care oil spray.
.
9 ]
[
and
4 ]
[
i
with
2 ]
[
2 ]
[
GB/IE
43

Publicité

loading

Ce manuel est également adapté pour:

472001 2407