Parkside Performance PPAHS 40-Li A1 Mode D'emploi page 38

Table des Matières
h Do not let familiarity gained from
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within
a fraction of a second.
Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and
Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source and/or the battery
pack, if detachable, from the
power tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
36 GB/IE
f
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
di erent from those intended could
result in a hazardous situation.
h Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool
in unexpected situations.
Battery tool use and care
a Recharge only with the charger
i
charger that is suitable for one type
of battery pack may create a risk of
re hen used ith another battery
pack.
b Use power tools only with
i
packs. Use of any other battery
packs may create a risk of injury and
re
c When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
i
terminals together may cause burns
or a re
d Under abusive conditions,
i
i
battery; avoid contact. If contact
i
i
I i
i
A
i
Table des Matières
loading

Ce manuel est également adapté pour:

472001 2407

Table des Matières