Publicité
Do not attempt to release a blocked/
jammed blade safety bar before
turning o the po er and removing
the battery. There is a risk of injury.
When operating the product, always
hold it well with both hands and at
some distance away from your body.
This enables better control of the
product in unexpected situations.
Do not use the product in the vicinity
of ammable li uids or gases Risk
of re and e plosion e ist in the
event of a short circuit.
heck the safety cutter bar
wear in regular intervals and have it
resharpened, if necessary. A blunt
safety cutter bar will overload the
product. Resulting damages are not
covered by warranty.
Do not attempt to repair the product
yourself, unless you are schooled in
this eld All orks hich are not
described in this manual, may only
be performed by our Service Centre.
Many accidents are caused by
poorly maintained equipment.
Do not use any accessories that are
not recommended by PARKSIDE.
This can result in electric shock or
re
Work standing on the ground and
keep your balance. Do not work
while standing on unstable support.
Before the work, search the hedge
for concealed objects, e.g. wire
fences, cable etc. In this way you
avoid damage to the product.
Hold the product correctly with
both hands on the handles. Loss of
control of the product may result in
injuries.
˜ Vibration and noise
reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
38 GB/IE
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
for
with these instructions and keep it
[
2 ]
ell lubricated here appropriate
Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual Memorise the safety arnings
and follow them to the letter. This will
help to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
S itch the product o and remove
the battery pack if there are
malfunctions. Have the product
checked by a uali ed professional
and repaired, if necessary, before
you operate it again.
˜ Residual risks
There will always be residual risks even if
you operate this power tool according to
the instructions. The following hazards
may occur in connection with the type
and design of this power tool:
Eye damage if no suitable eye
protection is worn.
Publicité
