Publicité
NOTE
The PARKSIDE app supports the
u
operating systems iOS 15.0 and
above or Android 6.0 and above.
˜ R
i
To nd the product in the PARKSIDE
app, the following requirements must be
met:
The PARKSIDE app is installed on
your smartphone and Bluetooth
activated.
The following battery packs are
inside the product: PARKSIDE
Performance Smart battery
PAPS 04 A1, PAPS 0 A1 or
S
PAPS 01 A1.
These smart battery packs have
already been connected to the
PARKSIDE app.
The product communicates with the
PARKSIDE app via the smart battery
packs.
The smart battery packs are
connected to the PARKSIDE app.
˜ Troubleshooting
Problem
The product does
not start.
The product works
with interruptions.
is
®
Possible cause
The battery packs
[
9 ]
inserted.
The battery packs
9 ]
[
discharged.
The on o s itch
7 ]
[
safety s itch
is defective.
[
]
The motor is defective.
Internal loose contact
The on o s itch
7 ]
[
safety s itch
is defective.
[
]
˜ Connecting the product to
the PARKSIDE app
1. Insert the smart battery packs
2. Press
on the product.
[
]
ashes
[
]
When the product is connected,
lights up continuously.
3. Open the PARKSIDE app.
The product is displayed in the list.
If the product does not appear in the
list, add the product manually.
˜ Connecting the product
manually
Monitoring and controlling the
product
1. Select the product from the list.
The overview page of the product is
displayed.
2. Select the desired setting on the
overview page.
Tap
to select the help menu if you
are unsure.
A dialogue box with a description for
the relevant setting is displayed.
Solution
are not
Insert the battery packs
(see "Inserting and removing
the battery packs"
are
harge the battery packs
(see "Charging the battery
pack"
Contact our Service Centre
or the
see "Service"
Contact our Service Centre
see "Service"
or the
.
9 ]
[
9 ]
[
9 ]
[
GB/IE
45
Publicité
