Technical Data - Parkside Performance Ppahs 40-Li A1 Mode D'emploi

Sound pressure level L
Uncertainty K :
pA
Sound power level L
Guaranteed:
–
Measured
–
Uncertainty K :
WA
WARNING!
m
Wear hearing protection!
Vibration emission value
Total vibration values (vector total
of three directions determined in
accordance ith EN 2
Front handle a :
h
Rear handle a :
h
Uncertainty K:
NOTE
The vibration emission values and
u
the noise emission values given
in these instructions have been
measured in accordance with a
standardised test procedure and
can be used for comparison of the
power tool with another tool.
The speci ed total vibration values
u
and the noise emission values can
also be used to make a provisional
load estimate.
WARNING!
m
Depending on the manner in which
u
the power tool is being used and,
in particular, the kind of workpiece
being worked, the vibration and noise
emission values can deviate from
the values given in these instructions
during actual use of the power tool.
: dB
pA
dB
:
WA
9 dB
9 dB
2 02 dB
1
m s
2
0 m s
2
1 m s
2
WARNING!
m
It is necessary to establish safety
u
measures to protect the operator
based on an estimation of the
vibration load during actual use
(wherein all states of operation
must be included, e.g. times when
the po er tool is s itched o
and times where the power tool is
switched on but running without
load
Charging time
WARNING! Risk of injury
m
and property damage due to
improper handling of the battery
pack!
Observe the safety instructions
u
and notes on charging and proper
use as shown in the user manual
for your battery pack and charger
from the 0 V TEAM series.
You can nd a detailed description
u
of the charging process and further
information in the separate user
manual.
The product is part of the
0 V TEAM series and can be
operated with battery packs of the
0 V TEAM series. Battery packs
of the 0 V TEAM series may only
be charged using chargers of the
0 V TEAM series.
Technical data of the battery pack
and charger: See separate user
manual.
The charging time is in uenced by
factors such as the temperature of
the environment and the battery
pack, as well as the mains voltage
applied, and may therefore deviate
from the speci ed values
GB/IE 33