Starting Requirements - Bosch BCR1 Série Mode D'emploi

Home Connect
23
24
25
No-Go zone
90

Starting requirements

!
Caution
Do not leave cables lying around – risk of damage!
Please move these out of the way before starting the
cleaning process.
23
Fig.
!
Caution
If the robot vacuum becomes caught on a power cable,
disconnect the cable from the mains immediately.
Then lift up the robot vacuum, move the power cable
out of the way and check it for damage.
24
Fig.
!
Caution
Do not use the appliance if the metal clip is missing or
damaged.
!
Caution
Reflective or dark surfaces may pose a problem to the
robot during navigation.
25
Fig.
Information
Clean delicate or shaggy rugs using the gentle Silent
mode, or exclude them from the cleaning process via
"No-Go zone" on the app.
en