Bosch BCR1 Série Mode D'emploi page 79

en
Cleaning programmes and operating modes
When you use the buttons on the robot vacuum, the ro-
bot vacuum will check whether the most recently saved
map matches the room to be cleaned before starting.
If the room is the same as the available map, the robot
vacuum will start cleaning. If it is not, the cleaning pro-
gramme will be cancelled. Then follow the instructions
in the app.
When operating the robot vacuum using the Home Con-
nect app, you can select one or more rooms for cleaning
individually. You can also mark particular areas as "no-
go zones". The robot vacuum will not enter these areas
when cleaning and they will be missed out.
The Silent, Eco and Power operating modes can be set
for this cleaning programme.
You can find detailed information about the operating
17
modes in the „Operating modes" section. Fig.
If the battery level is low, the robot vacuum will return
to the charging station. The programme will be resu-
med once it has recharged. This will only happen once
– if the battery drains a second time, the robot vacuum
will return to the charging station and stop cleaning.
79