Filter Care - Bosch BCR1 Série Mode D'emploi

Cleaning and care
a
45
2
1
b
a
46
b
102
Putting the filter unit with dust container back in
45
Fig.
a) Place the dust container on the filter unit and turn it
clockwise to lock it.
The filter unit with dust container can only be inser-
ted with the handle up.
b) Place the filter unit with dust container fully in the
robot vacuum.
Move the filter unit handle down and lock it in the
robot vacuum.
Information
If the filter unit is not placed and locked in the robot
vacuum, the "Insert dust container" error indicator will
light up and the robot vacuum will not start.
!
Caution
The filter unit must only be placed in the robot vacu-
um together with the dust container.

Filter care

Cleaning the cartridge filter
46
Fig.
The filtering action of this filter will remain high, even if
the surface of the filter becomes discoloured.
Take the filter unit with dust container out of the robot
42
vacuum. Fig.
Take the dust container out of the filter unit.
43
Fig.
Remove the fluff filter from the filter unit. Fig.
a) It is usually sufficient to lightly shake or tap out the
cartridge filter in order to dislodge any particles of
dirt.
b) If this is not sufficient, carefully vacuum the cartridge
filter with a vacuum cleaner on a low power setting.
en
44