Bosch BCR1 Série Mode D'emploi page 104

Cleaning and care
d
47
e
f
2
1
g
104
d) Take the brush roller out of the robot vacuum.
e) Use scissors to cut through threads and hairs wound
round the brush and then remove them.
If necessary, carefully vacuum the brush roller with a
vacuum cleaner.
Be sure to also clean the brush roller at the bearing
positions on the side
f) Place the brush roller back in the robot vacuum. Make
sure the brush roller is the right way round and lock it
in place by pushing it into the robot vacuum.
Ensure that the appliance's bearing position is also
free from dirt and hair.
g) Lower the cable guard and put the robot vacuum back
in its working position.
en