Husqvarna 535FBX Manuel D'utilisation page 8

2. Move the stop switch to the stop position and make
sure that the engine stops.
To do a check of the vibration damping system
The vibration damping system of the product decreases
the vibration between the engine unit and the shaft unit
of the product. This keeps the vibration in the handles to
a minimum which makes the operation easier.
1. Stop the engine.
2. Do a visual check for deformation and damage, for
example cracks.
3. Make sure that the elements of the vibration
damping systems is attached correctly.
To do a check of the muffler
WARNING: Bear in mind that the exhaust
fumes from the engine are hot and may
contain sparks which can start a fire. Never
start the product indoors or near
combustible material!
WARNING: Never use the machine indoors
or in spaces lacking proper ventilation.
Exhaust fumes contain carbon monoxide, an
odourless, poisonous and highly dangerous
gas.
WARNING: Never use a product with a
faulty muffler.
8
The muffler keeps noise levels to a minimum and sends
exhaust fumes away from the operator. For mufflers it is
very important that you follow the instructions on how to
check, maintain and service your product.
• Do a visual check for damage and deformation.
• Make sure that the muffler is correctly attached to
the product.
• If the muffler on your product has a spark arrester
screen, do a visual check. Replace the spark
arrester screen if it is damaged.
a) Clean the spark arrester screen if it is blocked. A
blocked mesh will make the engine overheated
which can cause serious damage.
1301 - 004 - 30.01.2021