Publicité
Control Panel
Operating Procedures
Select Mode
Notes:
• Program parameter settings such as "Delay Start" and "Temp." can only be adjusted
after a program is selected.
• When the machine is running, touch any program icon on the screen and the drum
lamp will automatically turn on.
Features
Mid-Cycle Loading
Tap Start/Pause to add more clothing during a cycle. If the "High Water Level"
or "Cooling Down" indicator is lit, this function will be temporarily unavailable
and the washing machine will continue its cycle until it is safe to unlock - at
which point this function can then be activated.
Power Outage Memory
If there is a power outage when the machine is running, the machine will
resume the current cycle after the power comes back on. During a power
outage, please do not force the door open.
Select Program
018
Parameter Settings
(This step can be skipped)
Door Lock/Unlock
After the Wash program is started, the door is automatically locked, and
the door lock lamp is always on. After the program is paused/ended, the
door is automatically unlocked with the door lock lamp off when the door
opening conditions are met. Unlocking is unavailable when the water level or
temperature is high during running.
tilt the machine back
about 45 degrees
Emergency Door Opening
In case of an emergency, tilt the machine back about 45 degrees, pull down the
orange emergency belt at the bottom of the machine about 10 mm, and open
the door. After opening the door, the belt will be back in place automatically.
Note:
The emergency belt must not be used during a regular wash cycle. Before
opening the door, please make sure all the water is drained out and be careful not to
get burned.
Start Washing
Publicité
