Publicité
Installation
❸ Connecting Water Inlet Hose
1. Choose the appropriate faucet
Quick-Connect Faucet for
Washing Machines
✓
1/2" or 3/4" male faucet
3. Connect two washing machines
1/2" plug
Water
inlet tee
3/4" quick-connect
assembly
adapter
1/2" to 3/4" adapter
1
Connect and assemble the water inlet tee according to the adapted faucet and
the type of water inlet pipe interface.
Note:
Check all connections for leaks (Never forget to install the sealing rubber ring at the component connection points).
Water valves of toilet and washbasin
20mm
20mm
✓
20mm
26mm
3/4"
1/2"
1
2
Pull down the latch to expose
the steel ball and then place
the adapter on faucet
2
2. Connect one washing machine
1/2" male faucet
Special quick-connect
faucet + water inlet tee
3/4" male faucet +
water inlet tee
1
Depending on the actual situation, connect one end of the water inlet hose to
the faucet (choose one out of three faucets) and the other end to the washing
machine's water inlet and tighten.
3
After assembling, connect one end of
the water inlet tee to the faucet and
the other two ends to the two washing
machines' water inlet hoses, and tighten.
012
2
Water Inlet Hose
Water inlet
4
Connect the water inlet hose to the
washing machine, connect the 3/4"
inlet end of the water inlet hose with
the water inlet, and tighten.
Publicité
