Publicité
Control Panel
❽ Hold for Delay Start:
After selecting a program, tap and hold "UVC Sterilization" for 3 seconds
to enter Delay Start. Then, tap "UVC Sterilization" to increase the time after
which the program will start by 30 minutes on the display (max 24 hours). Tap
"Start/Pause" to confirm the Delay Start, and the program will start when the
schedule time counts down to zero. Then the time displayed will be switched
to the estimated time of the selected program.
❾ UVC Sterilization:
Tap to turn the UVC Sterilization feature on or off; the UVC indicator light will
remain on or off accordingly. UVC sterilization is not available for all programs.
❿ Hold for Child Lock:
When the machine is running, tap and hold Temp. for 3 seconds to enable/
disable the child lock. If the lamp stays on, it indicates that the feature is
enabled, and all buttons except Power and Temp. buttons are disabled; when
it is off, it indicates that the feature is disabled.
⓫ Temp.:
After selecting a program, tap to select the desired water temperature from --
(room temperature)/20°C/30°C/40°C/60°C/90°C. Some programs may have
fixed water temperature for clothing material protection.
⓬ Display Screen:
Displays various program statuses, including remaining time, scheduled time,
error codes, water temperature, number of rinses, etc.
⓭ Remote Control Lamp
When this icon lights up, remote control is on; when the icon is off, remote
control is off.
⓮ UVC Lamp
:
When the light stays on, it indicates that the UVC Sterilization feature is on. If it
is off, it indicates that this feature is turned off.
⓯ Delay Start Lamp
When it stays on, it indicates that the wait time is being set; when it flashes,
it indicates that the time is counting down; and when it is off, it indicates that
there is no delay start or the program is running.
⓰ Door Lock Lamp
When it stays on, it indicates that the door is locked; when it flashes, it
indicates that the door cannot be opened at the moment; and when it is off, it
indicates that the door is unlocked.
⓱ Detergent Lamp
When it stays on, it indicates that the detergent Auto Dosing is enabled and
there is enough detergent; and when it is off, it indicates that the detergent
Auto Dosing is disabled.
⓲ WiFi Lamp
:
When it stays on, it indicates that the machine is connected to the network
and can be remotely controlled with the app; when it slowly flashes, it indicates
that the machine is waiting for network connection; when it quickly flashes, it
indicates that the machine is connecting to the network; and when it is off, it
indicates disconnection.
016
:
:
:
:
Publicité
