Publicité
Installation
❹ Connecting Drain Hose
1. Connect the drain hose to the washing machine
Remove the drain plug and firmly insert the bent end of the drain hose into
the washing machine's drain outlet.
3. Position the drain hose
1
Make sure the drain hose allows for unimpeded drainage. Do not squeeze or
bend it.
Notes:
• Ensure all connections are securely installed.
• Ensure the drain hose is securely inserted. Do not immerse the hose end in water, or siphoning may occur.
• Make sure all installations are done in strict accordance with the requirements, otherwise the washing machine may not work properly due to poor drainage.
Drain
Drain
outlet
Hose
Drain Plug
2. Connect two washing machines
Keep the drain hose no more than the washing machine
Upper part of the drain tee
Floor drain cover
Lower part of the drain tee
Depending on the actual situation, respectively connect the drain hoses of the
two washing machines to the upper and lower drain outlets, and tighten them.
2
If needed, use an extension hose with a length of less than 1.5m and an orifice
diameter of more than 16 mm.
013
≤ 500mm
Lower drain outlet
Upper drain outlet
Floor drain
16mm
Publicité
