Publicité
TROUBLESHOOTING (CONT.)
Problem
The humidity level isn't
changing in my room.
Incorrect humidity
percentage is
displayed.
The humidifier does not
respond to the remote.
If your problem is not listed, please contact
Possible Solution
Use a higher mist level setting.
Depending on your environment, the humidifier may take longer
to humidify your air.
The humidifier has a maximum effective range of 40–70 m² /
430–753 ft². If the room is larger, the humidifier will not be as
effective.
The room may be larger than the humidifier's effective range.
Move to a room smaller than 40–70 m² / 430–753 ft².
Moisture may have built up inside of the humidity sensor. Turn
off the humidifier and allow the sensor to air dry. Make sure the
nozzles are facing away from the sensor (see
page 9).
If the humidifier is placed within 30 cm / 12 inches of a wall or in a
corner, the humidity sensor cannot provide a proper reading for
the relative humidity in the room.
The humidity sensor will give an improper reading if it is exposed
to dust. Avoid using the humidifier in dusty rooms.
If the display always shows either 30% or 90% RH when you start
the humidifier, the humidity sensor is malfunctioning. Contact
Customer Support
(see page 26).
Move remote control to within 5 m / 16 ft of the humidifier.
Remove the plastic tab from the remote's battery compartment.
Change the battery (see
page 20).
Replacing the Remote Control
(see page 26
Customer Support
,
Getting Started
Battery,
).
EN
23
Publicité
