Publicité
EN
USING YOUR HUMIDIFIER (CONT.)
Warm Mist
•
Press
to turn on warm mist. Keep
pressing to increase the heat setting for
the mist, and to turn warm mist off.
•
Caution:
Mist may be hot.
your bare hands, face, or other exposed
skin over the nozzles while using warm
mist.
[Figure 3.2]
•
The humidifier may take 15 minutes to
warm up before producing warm mist.
•
The warm mist function can be used
with Auto Mode.
Icon
12
Do not
Warm Mist Chart
Setting
Low Heat
Medium Heat
High Heat
Figure 3.2
Humidity Level
You can customize the humidity level that
the humidifier will maintain.
place
FLASH 5x
Flash x4
Note:
•
•
•
•
4.
Once the humidity of the environment
reaches the set RH percentage, the
humidifier will automatically stop
misting. It will start misting again when
the humidity drops to 5% below the set
level.
1.
Press
display will show "--".
2.
Keep pressing
to set a humidity
level between 40%
and 80% Relative
Humidity (RH).
3.
The display will flash
4 times to confirm
your selection.
After setting the RH percentage,
the display will alternate between
showing the set RH percentage and
the current humidity percentage.
To cancel your selection, press and
hold
for 3 seconds, or set the
humidity level to "--".
The programmed humidity level
can be changed at any time by
pressing
.
You can still adjust the mist level,
the timer, and the warm mist setting
after setting the humidity level.
once. The
Publicité
