CARE & MAINTENANCE (CONT.)
7.
Rinse all parts until any vinegar smell is
completely gone.
8.
Dry all parts with a cloth. Make sure all
parts of the humidifier are completely dry
before reassembling or storing.
Figure 5.9
[Figure 5.9]
Cleaning the Aroma Pad &
Absorption Pad
1.
Pull out the aroma box and remove the
aroma pad.
[Figure 5.10]
2.
Remove the absorption pad from inside
the heating element.
3.
Rinse the pads under warm, running
water.
4.
Dry the pads with a clean cloth.
5.
Place the aroma pad back into the
aroma box.
6.
Place the absorption pad back into the
base.
Note: Do not
use liquid cleaners or
detergents to clean the pads or any
other part of the humidifier.
Figure 5.10
Figure 5.11
[Figure 5.11]
EN
19