Télécharger Imprimer la page

Toro Flex-Force Power System 24in 60V Mode D'emploi page 29

Masquer les pouces Voir aussi pour Flex-Force Power System 24in 60V:

Publicité

Problem
The gearbox is hot.
The tool is producing
excessive vibration or
noise.
The battery pack loses
charge quickly.
The battery charger is not
working.
The LED indicator light on
the battery charger is red.
Possible Cause
1. The air vents are
blocked.
2. The gearbox is not
being lubricated
properly.
1. The blades are dull or
damaged.
2. The machine is not
being lubricated
properly.
1. The battery pack is over
or under the appropriate
temperature range.
2. The trimmer is
overloaded
1. The battery charger
is over or under
the appropriate
temperature range.
2. The outlet that the
battery charger is
plugged into does not
have power.
1. The battery charger
and/or battery pack
is over or under
the appropriate
temperature range.
27
Corrective Action
1. Clean the air vents.
2. Lubricate the gearbox.
1. Contact an Authorized
Service Dealer.
2. Lubricate the blades
and gearbox.
1. Move the battery pack
to a place where it is
dry and the temperature
is between 5°C (41°F)
and 40°C (104°F).
2. Trim at a slower pace.
1. Unplug the battery
charger and move it to
a place where it is dry
and the temperature
is between 5°C (41°F)
and 40°C (104°F).
2. Contact your licensed
electrician to repair the
outlet.
1. Unplug the battery
charger and move the
battery charger and
battery pack to a place
where it is dry and the
temperature is between
5°C (41°F) and 40°C
(104°F).

Publicité

loading

Ce manuel est également adapté pour:

5184051840t