Toro Flex-Force Power System 24in 60V Mode D'emploi page 19

1. Auxiliary-handle switch
2. Auxiliary handle
3. Lock switch
4. Place 1 hand on the trigger handle. Place the other hand on the
auxiliary handle
5. Press the lock switch and then squeeze the trigger switch while
engaging the auxiliary-handle switch to turn on the hedge trimmer
(Figure 7).
The trimmer stays on as long as the auxiliary-handle switch is
engaged and the trigger is squeezed. You may release the lock
switch once the hedge trimmer is running
Figure 7
(Figure 7).
17
4. Trigger
5. Battery latch
6. Hedge trimmer venting areas
(Figure 7).
g308413