Publicité
You can also select the following
options:
Detect automatically:
If the relevant permissions are
enabled, the BEEZER
matically detected (provided that
the appliance is switched on and
connected to WiFi; enter the WiFi
password if necessary).
Add manually:
Select BEEZER
from the list of
®
available devices and activate
the "WiFi" and "Bluetooth" options
(enter the WiFi password if
necessary).
Overview of functions in the
app
21
20
#
15
is auto-
16
®
17
18
19
20
21
OPERATION
Switching on and precooling
• Ensure that the door is closed.
• Press and hold down the
start button (5.1) to switch the
appliance on.
After the BEEZER
on, an initial pre-cooling process
must be completed, which lasts
approx. 10 minutes. This process
15
starts automatically. The LED ring
on the BEEZER
16
and the display uses bars to indi-
cate how the process is progress-
17
ing. Once the pre-cooling process
has finished, the LED ring colour
18
changes from cyan to white. The
appliance is now ready to start
cooling beverages.
Note:
You can switch on the BEEZER
19
and start the pre-cooling process
from anywhere using the mobile
app. This means that the appli-
ance will be ready to use as soon
as you get home from shopping,
for example.
Cooling beverages
• Open the cooling chamber (1)
by pulling on the finger-pull door
handle (4). Place the beverage
you want to cool in the cooling
chamber (13). Ensure that the
beverage container is tightly
sealed.
Explanation
LED Ring Control: Configure the ambient light (colour selec-
tion). This only lights up when the BEEZER
Temperature Guide: Provides recommendations for the
optimal drinking temperature of various beverages.
Change PreSettings: Configure the preset values for
container size (5.3), cooling level (5.4) and cooling time.
Device Settings: Set the length of time until automatic defrost-
ing, activation of energy-saving mode and automatic switch-off
will occur. The acoustic signal (beeping) can also be activated/
deactivated.
Temperature: Displays the current temperature in the interior
of the cooling chamber.
Timer: Displays the remaining cooling time for the beverage.
Mode: Displays the current mode of the BEEZER
is switched
®
lights up cyan
®
is switched off.
®
• Close the cooling chamber
door and use the function buttons
to configure the settings (see
FUNCTIONS).
• Press the Start button (5.1)
to start the cooling process. The
duration of the cooling process
depends on which combination is
selected (see FUNCTIONS).
• During the cooling process, the
LED ring on the BEEZER
up blue, while the display uses
bars to indicate how the process
is progressing.
• The end of the cooling process
is indicated by an acoustic signal
(beeping) and the colour of the
LED ring changes from blue to
white. The beeping sound can
be activated and deactivated in
the app.
Once the cooling process is fin-
®
ished, open the cooling chamber
door and take out your cooled
beverage. Ensure that the door is
closed again afterwards.
CAUTION, risk of injury due
to breaking glass
Never leave beverages lying in
the cooling chamber after the
cooling process has ended!
Freezing a beverage may
cause glass to break.
English
.
®
lights
®
17
Publicité
