Publicité
Unfold the illustrations at the
front and back of these operating
instructions.
Please read these operating
instructions thoroughly before
using the appliance for the first
time. Keep these operating
instructions in a safe place and
ensure that they are included with
the appliance if passing it on to a
third party.
Alternatively, the current operat-
ing instructions are available at
www.ritterwerk.de.
INTENDED USE
The beverage cooler is intended
to be used for the occasional
cooling of beverages (e.g. in
bottles or cans). The appliance
is not designed for continuous
use. The BEEZER
is designed
®
for domestic use and is not
suitable for commercial use. If
the appliance is used for any
purpose other than its intended
use or if it is operated incorrectly,
severe injuries may occur or the
appliance may be damaged. All
warranty and liability claims will
be rendered null and void in this
case.
FUNCTIONS
The BEEZER
beverage cooler
®
can cool beverage contain-
ers with a capacity of up to
0.75 L. Depending on the size
of the beverage container, the
BEEZER
takes 3 to 6 minutes to
®
reach a temperature 12°C lower
than the start temperature. The
cooling process can be adjusted
or repeated to lower the drinking
temperature further.
The BEEZER
can be operated
®
using the 4 function buttons on
the appliance or via BEEZER
Connect. The start button (5.1)
turns the appliance on and off
and starts the cooling process.
There are 3 further function but-
tons below this, which are used to
configure the following param-
eters: rotation on/off, container
size and cooling level (5.2–5.4).
The colour of the LED ring (2) on
the cooling chamber door (1) indi-
cates the current mode in which
the appliance is operating.
LED ring
The colour of the LED ring
indicates the appliance's current
operating mode. The operating
modes are listed in the following
table:
Ring
colour
White
Cyan
Blue
Purple
Yellow
Red
Note:
The LED ring is unlit as standard
when the appliance is switched
off. When controlling the
BEEZER
via BEEZER
®
you can activate the LED ring
and use the appliance to provide
ambient lighting by selecting your
preferred ring colour.
Function buttons
Rotation
In the standard configuration, the
beverage container is rotated dur-
ing the cooling process to ensure
uniform cooling of the beverage.
The rotation function can be
deactivated by pressing this
function button, e.g in the case of
®
square bottles or containers with
delicate labels or imprints. The
rotation symbol indicates whether
rotation is activated.
Note:
The cooling process is 20%
slower if rotation is deactivated.
Meaning (mode)
Ready for use
Pre-cooling
process/Auto-
matic defrosting
Beverage
cooling
Energy-saving
mode
Switching off
Door open
Connect,
®
Container size
S
0.25 L
M
0.5 L
L
0.75 L
Cooling level
The 3 levels of cooling are indi-
cated on the display by one, two
or three bars.
Cooling times
The duration of the cooling pro-
cess depends on which combina-
tion of settings is selected. The
table below shows the various
pre-settings.
Under normal conditions, the
start temperature of the beverage
is reduced by at least 12°C at a
medium setting.
Cooling time (in minutes)
based on cooling level and
container size (start tempera
ture of 21°C)
*
(t in min)
2
3
small
3
4
medium
5
6
large
Note:
These pre-settings can be
adjusted in the mobile app.
Individual timers ranging from
1 to 60 minutes can also be
selected and started. In addition,
expert mode helps calculate the
ideal cooling time to reach your
desired temperature. The app
also contains a table showing the
optimal drinking temperatures for
the most common drinks on the
market.
Cooling chamber door
All processes that are currently
running stop when the cooling
chamber door is opened. The
interrupted processes continue
once the door is closed again.
English
**
***
4
5
7
15
Publicité
