Drive Wheel Repair - Quickie Q50 R Carbon Notice D'utilisation

8.2.2 Drive wheel repair

To remove the drive wheel: (Fig. 8.3 & 8.4)
• Remove the colour insert off the drive wheel.
• Using 2 x 4mm Hex keys, unscrew and remove 3 bolts from
the drive wheel.
• Remove drive wheel from the wheelchair..
Note: Reverse the process to put the wheel back on. (Tighten
bolts to 8Nm).
To remove the front castor wheel: (Fig. 8.5)
• Using 2 x 4mm Hex keys, unscrew and remove the central
bolt from the castor wheel.
• Remove castor wheel from the wheelchair.
Note: Reverse the process to put the wheel back on. (Tighten
bolt to 6Nm).
Note: Transfer colour insert over if needed to new wheel.
To remove the front anti-tip wheel: (Fig. 8.6)
• Using 2 x 4mm Hex keys, unscrew and remove the central
bolt from the anti tip wheel.
• Remove anti tip wheel from the wheelchair.
Note: Reverse the process to put the wheel back on. (Tighten
bolt to 4-5Nm).
Q50 R Carbon 32
Fig. 8.3
Fig. 8.4
Fig. 8.5
Fig. 8.6
English Rev. B