Maintenance And Care - Stihl HSA 66 Mode D'emploi

Maintenance and Care

The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Move the retaining latch to before performing any work on the power tool.
ƒ
Complete machine
Controls (retaining latch, trigger switch
lockout, trigger switch and switch lever)
Two-hand control
Cooling inlets
All accessible screws and nuts
Battery
Battery compartment
Cutting blade
Gearbox and connecting rod
Safety labels
1)
Spray with STIHL resin solvent after cleaning
2)
STIHL recommends a STIHL servicing dealer.
HSA 66, HSA 86
Visual inspection (condition)
Clean
Check operation
Clean
Check function – blades must quickly
come to a standstill when the trigger
switch and/or switch lever is released
Visual inspection
Clean
Retighten
Visual inspection
Clean
Check operation (eject battery)
Visual inspection
1)
Clean
Sharpen
2)
Have checked by servicing dealer
every 50 hours of operation
Have STIHL gear lubricant replenished
every 50 hours of operation by servicing
2)
dealer
Replace
X
X
X
X
X
X
X
X
X
X
X
after
English
X
X
X
X X
X
X X
X X
X
41