Min Min /Pv Max; Drag Pointer Pv; Drag Pointer T; Displaying/Resetting Operating Time - WIKA DMSU21SA Mode D'emploi

9. Diagnostic functions
Resetting
1. Open the operating menu with [↵].
Select "Diagnostic" and confirm with [↵].
EN
2. Select "Drag pointer" and confirm with [↵].
3. Select "P min/max" and confirm with [↵].
4. Select "reset" and confirm with [↵].
5. Select limit value and confirm with [↵].
P = P
■
▼ min
P = P
■
▲ max
» Limit value is reset.

9.5 Drag pointer PV

Displays the minimum and maximum value of the primary value since the last reset.
→ For displaying and resetting see chapter 9.4 "Drag Pointer Pmin/Pmax".

9.6 Drag pointer T

Displays the minimum and maximum temperature of the temperature sensor, measured
since the last reset.
→ For displaying and resetting see chapter 9.4 "Drag Pointer Pmin/Pmax".

9.7 Displaying/resetting operating time

Displays the operating time since the last reset.
Displaying
1. Open the operating menu with [↵].
Select "Diagnostic" and confirm with [↵].
2. Select "Operat. time" and confirm with [↵].
3. Select "display" and confirm with [↵].
» Operating time is displayed.
44
/PV
min max
/T
min max
WIKA operating instructions, model DMSU21A