Signature SFC3000STW Manuel D'utilisation page 76

Warning!
1. Be careful not to press on the head;
2. when fitting the water tank,ensure the head
inserted into the hole first.
Filling water
1. Open the water supply inlet cover from the right
side.
2. Fill the water.
Caution!
● Fill with water up to 3L (which is suggested), and
not above the level. Otherwise, it may overflow
even when the cap cover is close.
● Other beverage(milk,juice, carbonated beverage
etc) is not suggested to be used than potable
water . Especially beverage including grain must not
be used (may result in failure).
● Hot water can not be filled into the water tank
directly.
water supply inlet cover
Middle rack
- 25 -