Publicité
Warning!
When changing the side at which the
door opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
OPERATION
Starting up and temperature regulation
● Insert the plug of the connection lead into the
plug socket with protective earth contact. When
the refrigerator compartment door is opened, the
internal lighting is switched on. After the fridge has
been placed in position, wait for 5 minutes before
electricity is supplied. Don't store anything until
the temperature inside the fridge becomes low
enough.
● The temperature selector knob is located on the
top of the refrigerator compartment.
Setting 0 means:
Off.
Clockwise rotate the knob to turn on the appliance
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important!
Normally we advise you to select setting of 2 or 3 or
4, if you want the temperature higher or colder
please turn the knob to warmer or colder setting
accordingly. When you turn the knob to colder
which can lead to the more energy efficiency.
Otherwise, it would result in more energy
consuming.
- 18 -
Publicité
