Publicité
Changing the light bulb
Warning! If the LED light is damaged. DO
NOT CHANG IT BY THE USER!
Changing the LED light carried out by inexperienced
persons may cause injury or serious malfunctioning.
it must be replaced by specialized persons in order
to avoid a hazard.
Contact your local Service Force Center for help.
● Before changing the LED light, switch off the
appliance and unplug it, or pull the fuse or the
circuit breaker.
● LED Light data: 220-240V~,max1.5W.
● To switch off the appliance, set the temperature
regulator to position "0".
● Unplug the mains plug.
● Press the Lampshade, and slide it
● To change the LED light, undo the screw .
● Remove the bulb fixed block, change the defective
LED light .
● Refit the bulb fixed block, the LED light cover and
the screw.
● Put the refrigerator back into 1operation.
Buld fixed block
LED light
Lampshade
Screw
Control Box
- 20 -
Publicité
