Signature SFC3000STW Manuel D'utilisation page 62

1. Stand the refrigerator upright . Open the upper
door to take out all door racks (to avoid damage)
and then close the door.
Remove the door shelf
2.Remove part1, then take down part2 from the top
right side of refrigerator. Unscrew screws3 by a
8mm socket driver or a spanner, and remove
hinge4. Please hold upper door by hand when
installing. Use a putty knife or thin-blade
screwdriver to prize part5 which is at the top left
corner of the refrigerator.
- 11 -