Signature SFC3000STW Manuel D'utilisation page 75

Before using
Before using this appliance for the first time, you
should use it based on following instructions:
1.Hold the two sides of the water tank tightly, then
pull up the water tank by shaking up and down.
2.Unscrew the head, then clean it and the inside of
water tank.
Assembling
Before assembling, please drain the water inside the
tank, and check whether the washer reversed or not.
1. Insert the head into the hole.
2. Fit the tank along the guides on the door.
3. Press down two side of the tank.
4. When you hear a click sound, that means the
installation is completed.
dispenser part
Slot
Guide
- 24 -