Publicité
REVERSING THE DOOR
The side at which the door opens can be changed,
from the right side (as supplied) to the left side, if
the installation site requires.
Warning! When reversing the door, the appliance
must not be connected to the mains. Ensure that
the plug is removed from the mains socket.
Tools you will need
8mm socket wrench
Cross-shaped
screwdriver
Additional parts(in the plastic bag)
Note:If required , you may lay the refrigerator on its
back in order to gain access to the base, you
should rest it on soft foam packaging or similar
material to avoid damaging the backboard of the
refrigerator.
To reverse the door, the following steps are
generally recommended . if some parts are not
shown in the picture below, please ignore the
relevant description.
Not provided
Thin-blade
screwdriver
Monkey wrench
Door stopper-left
- 10 -
Putty knife
8mm wrench
Publicité
