Signature SFC3000STW Manuel D'utilisation page 64

6. Unscrew the two special flange self-tapping
screws which are used for fixing the middle hinge
part, then remove the middle hinge part that
hold the lower door in place.
NOTE:When removing the door, watch for washer(s)
between the center hinge and the upper of the
lower door that may stick to the door. Don't lose it.
7. Place the lower door on a smooth surface with its
panel upwards. Use a putty knife or thin-blade
screwdriver to prize part1 ,then install it to the
opposite side and tighten it securely.
Loose screw 4 and take down part2and part 3, then
Install door stopper left5provided (in the plastic
bag) to the left side and tighten them securely.
- 13 -