Operation Guide; Filter Reset - Sharp FP-N40CX Manuel D'utilisation

OPERATION GUIDE

ODOR SENSOR GUIDELINES
• The odor sensor responds to cigarette and pet odors, as well as other scents such as Insec-
ticide, cosmetics, spray, alcohol, or sudden changes in temperature or humidity.
• When the unit is in Auto Mode and room is in a closed environment the sensor will respond to
some odors by increasing the air flow. If you do not desire increased air flow, please adjust the
sensitivity of the sensor.

FILTER RESET

• Once the Washable Active Carbon Filter has been cleaned or replaced, connect the power
cord to the outlet and use a pointed instrument to activate the Filter Reset on the Remote
Control.
Once the Filter Reset Button has been activated, you will hear a beep sound that means that
the unit has been reset. If the Filter Indicator Light is on, it will then go out automatically.
GUIDE FOR WASHABLE ACTIVE CARBON FILTER
• Can this filter be washed?
When should I wash this
filter?
• Will washing improve the
filter's performance?
• When does Washable Ac-
tive Carbon Filter need re-
placement?
Please refer to E-14 page for directions on how to clean your Washable Active Carbon Filter.
• Yes! The Active Carbon Filter is washable.
Generally, you should wash it every 2 months
or if odor persists.
• After time the filter will loose its deodorizing
ability. When washed, the filter will be restored
to a nearly new working level of deodorization.
• Sharp recommends to replace filters 5 years
after opening.
Even if washed regularly (every 2 months), the
Washable Active Carbon Filter usually needs
to be replaced 5 years after opening the filter
package. Replace your True HEPA Filter at the
same time you replace the Washable Active
Carbon Filter since the deodorizing perform-
ance will slowly decrease with repeated wash-
ing.
E-18