Part Names; Main Unit Display - Sharp FP-N40CX Manuel D'utilisation

PART NAMES

MAIN UNIT DISPLAY

Filter Indicator Light
If the Filter Indicator Light is lit, the Washable Active Carbon Filter needs to be cleaned.
AUTO Operation
Indicator Light
FILTER
Remote Control Receiver
Odor Sensor
• Detects odors such as tobacco
smoke, pets, cosmetics, etc.
• It can not detect odorless pollen
and dust.
Fan Level
Indicator Light
AUTO SILENT MED HIGH MAX POLLEN
Pollen Mode
OFF Timer Display Indicator Lights
Indicator Light
(set using remote control)
OFF TIMER
CLEAN-SIGN
CLEAN-SIGN LIGHT
The color changes according to the air condition.
Clean (Green) Slightly Impure (Orange)
ABOUT THE CLEAN-SIGN
• The Odor sensor displays a CLEAN-SIGN depending on relative
changes to the environment from the time the power plug is inserted
into the wall outlet and thereafter.
• When the air is extremely impure at the time the power plug is in-
serted, the CLEAN-SIGN may light green since the impure condition
is the environment against which the sensor bases the impurity rate
on. In this case, operate the unit for a while in Clean Mode first,
then switch to the desired operation mode. See Page E-13
• To reset the base impurity rate of the CLEAN-SIGN remove and in-
sert the power plug.
• The light can be turned off using 'Display ON/OFF' Button on the re-
mote control. Please turn off the light it is not needed. See Page E-13
MODE-ON/OFF Button
(Used to select operations or turn the unit off)
Main Unit
Band
See Page E-11
True HEPA Filter (white)
(Dust Collection Filter with Anti-Bacterial Apa-
tite Filter sheet covering its front surface)
Washable Active Carbon Filter (black)
See Page E-14
(Deodorization filter)
Pre-Filter
Front Panel
Remote Control
Hook
Stand
(Be sure to mount for tabletop installation)
Thumbscrew
E-8
Plasmacluster
Very Impure (Red)
See Page E-12
See Page E-17
See Page E-13
See Page E-9