Siemens SITRANS F Instructions D'utilisation page 90

Communication PROFIBUS
A.9 Fichiers GSD
Unit_Diag_Bit(31)
Unit_Diag_Bit(32)
Unit_Diag_Bit(33)
Unit_Diag_Bit(34)
Unit_Diag_Bit(35)
Unit_Diag_Bit(36)
Unit_Diag_Bit(37)
Unit_Diag_Bit(38)
Unit_Diag_Bit(39)
Unit_Diag_Bit(55)
User_Prm_Data_Len = 0
;----------- Description of modules --------------------------------
-----------;
; The mandatory modules order is defined at the end of the file by
Assignment of
; Modules using SlotDefinition Keyword.
;
;
from the
; device with the input data, use Free place for this module instead
of another
; identifier.
;
; For the modules of Flow, Sound Velocity and Sound Amplitude you
have the
; choice between these different identifiers:
;
; - Free Place
; - Short identifier format (identifier byte)
; - Long identifier format (extended identifier)
;
; For the modules Quantity net, Quantity forward and Quantity
reverse you have
; the choice between these different identifiers:
;
; - Free Place
; - Long identifier format (extended identifier)
; - Long identifier format, resettable (extended identifier)
;
; With the "resettable" format it is possible to reset the
totalizer,
; transmitting suitable output data to the device.
;------------------ Modules definitions ----------------------------
----------;
;-------------------------------------------------------------------
-----------
; Free place Module - usable for each module instead of another
identifier
;-------------------------------------------------------------------
-----------
Module = "Espace libre"
1
EndModule
;-------------------------------------------------------------------
-----------
; Flow Modules
88
= "Autocalibrage echoue"
= "Erreur du point zero"
= "Energie auxiliaire manquante"
= "Configuration inadmissible"
= "Redemarrage execute"
= "Demarrage a froid execute"
= "Maintenance necessaire"
= "Erreur dans Ligne caracterist."
= "Numero d identification change"
= "Informations suppl. disponibles"
Use exactly one identifier per module.
If you don´t want to get the measuring value of a certain module
0x00
Instructions de service, 05/2014, A5E35120781-001