Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Help in case of faults
=
Repairs should only be carried out by suitably qualified staff.
Regular inspection and maintenance prevent faults from occurring
during operation and help to ensure safety. The inspection and
maintenance intervals depend on the way the appliance is used. Ask
the Customer service staff of your dealer or send for the current
Customer service information material provided by the manufacturer.
Some problems can be solved without calling the Customer service.
This can save time and money.
Service and maintenance in the event of electric oven
problems
=
Do not operate combined oven when one of the ventilator wings
are blocked or not installed.
=
For appliances with built-in contactors (see wiring diagram),
check that the contactors move freely after problems when the
customer's fuses have blown.
Problem
Possible cause
The appliance is
Defective fuse.
switched on, oven
does not heat up,
Heating element
green pilot light comes
defective.
on.
The appliance is
Defective fuse.
switched on, oven
does not heat up,
Mains connection
green pilot light does
interrupted.
not come on.
When the appliance is
Incorrect fuses.
switched on, the fuses
repeatedly blow.
Appliance defective.
Only for dual oven:
Disturbing ventilation
Ventilator wing was
noises when the oven
bent during cleaning
is switched on.
or is rubbing at
dividing wall.
24
Remedy
Check fuse and
replace if necessary.
Disconnect the
appliance from the
mains via the fuse,
inform Customer
service.
Check fuse and
replace if necessary.
Have a technician
check to see whether
the appliance is
connected to the
customer's mains; if
necessary, reconnect.
Have fuses checked by
an electrician.
Disconnect the
appliance from the
mains and call
Customer service.
Replace ventilator
wings with new
ventilator wings. Do
not try to repair!
W.Nr. 07 25 35
Publicité
Table des Matières
