Now you can enter the new PIN:
Enter the number sequence by pressing the
u
corresponding buttons of the A keys.
After entering one digit, the device automatically
switches to the next one. To correct any entry er-
rors, select the corresponding digit by pressing
the rocker switch or @ again.
After entering the complete new PIN number,
press the OK button :.
u
The new entry is stored.
Changing the Bluetooth® name of
the device (RAD NAME)
The Bluetooth® name of the device under which it
is displayed by other Bluetooth® devices is set to
"BLAUPUNKT BT" at the factory. To change this
name,
open the Bluetooth® menu.
u
Press the rocker switch
u
"RAD NAME" menu item is selected.
Press the OK button : to call up the menu
u
item.
You can now enter a new Bluetooth® name:
Enter the name by pressing the correspond-
u
ing buttons of the A keys. Select the
desired letter, if necessary by pressing a
button several times.
After entering one letter, the device automatical-
ly switches to the next one. To correct any entry
errors, select the corresponding digit by press-
ing the rocker switch or @ again.
After entering the complete name,
press the OK button :.
u
The new Bluetooth® name is stored.
Sound settings
The following sound settings can be changed in
the Audio menu:
•
•
•
Opening the Audio menu
To call up the Audio menu,
u
OR:
@ until the
or
u
u
Adjusting bass, treble and volume
distribution
To perform settings,
u
The currently active setting is represented by a
bar display.
Bluetooth® phone call | Sound settings
Adjusting bass, treble and volume distribu-
tion
Selecting the sound presetting
Changing equalizer settings
Note:
The settings for bass (BASS), middle
(MIDDLE) and treble (TREBLE) are each
stored for the current audio source.
press the AUDIO button <.
Press the MENU button 9.
Press the rocker switch @ until the Audio
menu is displayed.
in the Audio menu, press the rocker switch
@ to select one of these menu
or
items:
•
"BASS ": Bass level between -7 and +7
•
"TREBLE ": Treble between -7 and +7
•
"BALANCE ": Volume distribution left/right
between -9 and +9
•
"FADER ": Volume distribution front/rear
between -9 and +9
•
"X-BASS ": Increasing the bass at low
volume from 0 (off) to 3
113