Registering The Cell Phone; Determining The Master Telephone - Blaupunkt New Jersey MP68 Mode D'emploi Et De Montage

Bluetooth® phone call

Registering the cell phone

The device can be registered with up to
5 Bluetooth®-ready cell phones or other devices
such as MP3 players. If you register a sixth one,
the Bluetooth® device registered fi rst is unregis-
tered.
To register a cell phone,
open the Bluetooth® menu.
u
The "PAIR" menu item is selected.
Press the OK button : to call up the menu
u
item.
The Device menu opens. The "PHONE" menu
item is selected.
Press the OK button :.
u
The display shows the PIN number for the
Bluetooth® connection. The Bluetooth® cell
phone can now be registered.
If requested, enter the PIN displayed in your
u
cell phone.
The car sound system automatically establishes
a Bluetooth® connection with the cell phone. If
the connection has been established, "DEVICE
CONNECTED" is briefl y shown on the display,
and the symbol for the Bluetooth® signal strength
appears. If no connection could be established,
then "CONNECTION FAILED" is briefl y displayed.
Notes:
•
The time required for the connection is
dependent upon the cell phone and can
differ from cell phone to cell phone.
• If the car sound system is switched off
and on again, it automatically attempts to
establish a connection with the master
telephone (see the next section) or the
cell phone that was connected last. If the
cell phone is not available, the display
briefl y shows "NO DEVICE FOUND –
BLUETOOTH CONNECTION FAILED".
106

Determining the master telephone

If you register several telephones with the de-
vice, you can determine a master telephone.
The master telephone has a higher priority than
the other registered telephones:
•
If the device is switched on, it fi rst attempts
to establish a connection with the master
telephone. Only if the master telephone is
not available, does the device attempt to
establish a connection with the telephone
registered last.
•
If you register a sixth Bluetooth® device, the
one registered fi rst is unregistered. During
the process, the master telephone always
remains registered, even if it is the fi rst
registered Bluetooth® device in the list.
Instead, the next Bluetooth® device in the list
is unregistered.
Open the Bluetooth® menu.
u
Press the rocker switch
u
"MASTER" menu item is selected.
Press the OK button : to call up the menu
u
item.
A list of the registered cell phones is displayed.
Press the rocker switch
u
a telephone.
Press the OK button :.
u
The selected telephone is defi ned as master
telephone and identifi ed by an "M".
To delete the master telephone,
select the master telephone in the list with
u
the rocker switch
Press the OK button :.
u
The "DELETE" option is selected in the sub-
menu.
Press the OK button :.
u
@ until the
or
@ to select
or
@.
or