Receiving The Programme Type; Selecting A Programme Type Or Switching Off Pty (Pty Type); Selecting The Programme Type Language (Pty Lang) - Blaupunkt New Jersey MP68 Mode D'emploi Et De Montage

Tuner mode
Press the OK button :.
u
Switch between the settings with the rocker
u
switch or @.
• "REGIONAL"
The tuner only changes to alternative
frequencies of the set stations that
broadcast the same regional programme.
•
"REGIONAL"
The tuner also changes to alternative
frequencies that broadcast another
regional programme.
Press the OK button : to select a different
u
function, or press the DIS•ESC button ; to
exit the menu.

Receiving the programme type

You can select a programme type (PTY ) to pur-
posefully search for stations, for example, that
broadcast rock music or sport events .
Selecting a programme type or switching off
PTY (PTY TYPE )
Press the MENU button 9.
u
The Tuner menu opens.
Press the rocker switch
u
the "PTY TYPE" function.
Press the OK button :.
u
A list with available programme types and the
setting "NO PTY" (PTY off) are displayed.
Press the rocker switch
u
the desired programme type or the "NO PTY"
setting.
Press the OK button : to select a different
u
function, or press the DIS•ESC button ; to
exit the menu.
86
: Regional function on.
: Regional function off.
@ to select
or
@ to select
or
You can locate a station that broadcasts the se-
lected programme type by using the automatic
station seek tuning. For instructions, please read
the section "Station seek tuning" in this chapter.
If no station with the correct programme type is
found, the display briefl y shows "NO PTY FOUND"
and the original frequency is adjusted again.
Selecting the programme type language
(PTY LANG )
You can select the language in which the pro-
gramme types should be displayed. Available are
"DEUTSCH", "ENGLISH" and "FRANÇAIS".
Press the MENU button 9.
u
The Tuner menu opens.
Press the rocker switch
u
the "PTY LANG" function.
Press the OK button :.
u
Press the rocker switch
u
the desired language.
Press the rocker switch @ to switch on
u
the selected language.
Press the OK button : to select a different
u
function, or press the DIS•ESC button ; to
exit the menu.
@ to select
or
@ to select
or