What Features Do Mp3 Or Wma Cds Have To Have; Inserting And Removing A Cd; Selecting The Cd As Audio Source - Blaupunkt New Jersey MP68 Mode D'emploi Et De Montage

Startup
What features do MP3 or WMA CDs have to
have?
The device can only play and display MP3 or
WMA CDs with the following features:
CD format ISO 9660 (Level 1 or 2) or
Joliet
ID3 tags Version 1 or 2
Format Only MP3 or WMA fi les,
folders, playlists
Number Max. 999 tracks
in 99 folders
Naming of File extension ".wma"/
fi les ".mp3"
Max. 16 characters (more
characters are possible,
but they reduce the max.
number of fi les)
No special characters or
umlauts
Bit rate MP3: 8 to 320 kbps
WMA: 8 to 192 kbps

Inserting and removing a CD

CAUTION!
Damaging the CD drive
Labelled or shaped CDs can damage the CD
drive.
Do not insert any mini CDs (8 cm diameter)
y
or shape CDs damage.
Insert only circular CDs with a 12-cm
y
diameter.
Do not attach labels to CDs since the label
y
may detach during operation.
80
Note:
Label CDs only by using a marker since it
does not contain any caustic materials.
Permanent markers can damage CDs.
If a CD is in the drive, press the
u
1.
The CD is ejected.
Remove the CD.
u
If you do not remove the CD, it is automatically
pulled in again after a few seconds.
Insert the CD with its printed side upper-
u
most into the CD drive 2 until you feel
some resistance.
The CD is automatically drawn in.
"READING" briefl y appears on the display. Next,
the following appears:
•
The audio CD display if an audio CD is
inserted.
•
The MP3 display if an MP3 or WMA CD is
inserted.
The CD starts playing.

Selecting the CD as audio source

You can select an inserted CD as audio source:
Press the SOURCE button 8 repeatedly
u
until "CD" (for audio CD) or "MP3" (for MP3
CD) appears on the display.
Note:
The CD mode can be selected only if a read-
able CD is inserted.
To operate the audio CD display, please read the
chapter "CD mode (audio)".
To operate the MP3 display, please read the
chapter "CD/USB mode (MP3/WMA)".
button