Setting The Equalizer - Blaupunkt Sacramento CD33 Notice D'emploi Et De Montage

All manuals and user guides at all-guides.com
Tips
• EQ disp *
Displays the current setting of equalizer curve, if the equal-
izer has been set.
(See " Setting the equalizer ")
bAS
• X-BASS
For enhanced bass centered @ 72 Hz, Blaupunkt's X-BASS
function can be set for either each band and CD/CD changer/
AUX mode. Reduce X-BASS level if your combination of
speakers and add on amplifires sound distorted at the pre-
ferred sound level.
• AU GAIN (AUX gain)
Adjust the input volume of the external equipment.
It is displayed only AUX mode.
• LMt LEVEL (Limit volume)
Adjust the volume at the time of power on. You can adjust
with the actual sound.
MUt
• LEVEL (Mute level)
You can adjust the mute level with the actual sound.
• Settings for BASS, TREBLE, LOUDNESS and X-BASS can be
made to each of the following modes independently:
FM/AM/CD/CD changer/AUX
E-4
SacramentoCD33_Eng 4

Setting the equalizer

You can select an equalizer curve for 4 music types (Rock,
Pop, Classic, Jazz).
Selecting the equalizer curve
1.
Press the to select the BAS/TRE adjustment mode.
AUDIO
2.
Press the preset button ~ to select the desired
1 6/
equalizer curve. " " will light on the display window.
• ROCK
1
• POP
2
• CLASSIC
3
• JAZZ
4/MIX
• 5/RPT USER 1
• USER 2
6/
Adjusting the equalizer curve
You can store and adjust the equalizer settings for frequency
and level.
1.
Press the to select the BAS/TRE adjustment mode.
AUDIO
2.
Adjust the desired sound characteristics with BAS/TRE/
LOUD/X-BASS.
3.
Press the or for more than 2 seconds to store
5/RPT 6/
the equalizer curve.
• USER 1
5/RPT
• USER 2
6/
Cancelling the equalizer curve
1.
Press the to display the current equalizer curve.
AUDIO
2.
Press the while the name of equalizer curve
MUTE / SENS
blinking to cancel the equalizer curve.
The "EQ OFF" will blinking for few seconds.
Setting the sound stage
You can select/adjust the position of sound stage to best serve
a particular seat.
Selecting the sound stage
1.
Press the to select the BAL/FAD adjustment mode.
AUDIO
2.
Press the preset button ~ to select the desired
1 6/
sound stage as follows.
• POS 1 (For the left seat)
1
• POS 2 (For the front seat)
2
• POS 3 (For the right seat)
3
• POS 4 (For the rear seat)
4/MIX
• POS 5 (For all the seat)
5/RPT
• POS 6 (For all the seat)
6/
Adjusting the sound stage
1.
Press the to select the BAL/FAD adjustment mode.
AUDIO
2.
Adjust the desired sound stage.
3.
Press the desired preset button ~
1
2 seconds to store the desired sound stage.
2/5/03, 4:27 PM
B R2 F R4
B 0 F R4
B L2 F R4
B 0 F F4
B 0 F 0
B 0 F 0
for more than
6/