Transportation, Storage And Disposal - Husqvarna K 1270 II Manuel D'utilisation

Transportation and storage
CAUTION:
to the product during transport of the
product. The rail fixture is a precision tool. A
damaged tool gives less accurate cuts.
• Keep the rail fixture separated from the product in
the supplied box.
• Secure the product during transportation to prevent
damage and accidents.
• Remove the cutting blade before transportation or
storage of the product.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the cutting blades in dry, frost free conditions.
• Examine all new and used blades for transport and
storage damage before assembly.
• Clean and maintain the product before storage.
Maintenance on page 27 .
Refer to
• Remove the fuel from the fuel tank before long-term
storage.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as oil or fuel, at a service
center or at an applicable disposal location.
• When the product is no longer in use, send it to a
HUSQVARNA dealer or discard it at a recycling
location.
38

Transportation, storage and disposal

Do not install the rail fixture
1631 - 001 - 04.05.2021