Preventing Damage; Transporting The Machine - BDS Maschinen MAB 1300 Mode D'emploi

Safety

Preventing damage

Transporting the machine

42
CAUTION
Potential damage to property if the machine is improperly
used!
Observe the following instructions to avoid damage:
► Before connecting the machine, compare the connection
data (voltage and frequency) on the rating plate with those
of your mains power supply. The data must correspond in
order to avoid damage to the machine.
► Always use the handle to carry the machine and not the
connecting cable.
► Do not pull the mains cable to remove the plug from the
mains socket.
► Do not crush the connecting cable.
► Do not expose the connecting cable to heat or chemical
liquids.
► Do not pull the connecting cable across sharp edges or hot
surfaces.
► Lay the connecting cable in such a way that it cannot be
caught and wound up in the rotating part of the machine.
WARNING
Danger resulting from heavy weight of the machine!
Due to the heavy weight of the machine, observe the following
instructions
► Transport the machine only with suitable transport material.
► Lifting the machine manually should be carried out by two
persons.
► When transporting the machine with a crane, use suitable
lifting devices. Pay attention to the carrying capacity of the
lifting device.
MAB 1300