Intended Use; Liability Disclaimer - BDS Maschinen MAB 1300 Mode D'emploi

Instructions for use

Intended use

Liability disclaimer

38
The machine is intended solely for drilling operations in magnetic
and non-magnetic metals, and for cutting threads, countersinking
and reaming within the limits specified in the technical data.
Any other use other than previously stated is considered as im-
proper use.
WARNING
Danger resulting from improper use!
If not used for its intended purpose and/or used in any other
way, the machine may be or become a source of danger.
► Use the machine only for its intended purpose.
► Observe the procedures described in these operating inst-
ructions.
No claims of any kind will be accepted for damage or injury resul-
ting from use of the machine for other than its intended purpose.
The risk has to be borne solely by the machine owner.
NOTE
► If used commercially, pay attention to compliance with the
accident prevention and safety at work regulations.
All technical information, data and instructions for commissioning,
operation and maintenance of the machine contained in these
operating instructions represent the latest status at the time of
printing.
The manufacturer assumes no liability for damage or injury
resulting from failure to observe the operating instructions, use for
other than the intended purpose, unprofessional repairs, un-
authorised modifications or use of non-approved spare parts and
accessories, tools and lubricants.
MAB 1300