Before Using For The First Time; Transport Inspection; Preparation; Additional Safety Measures For Certain - BDS Maschinen MAB 1300 Mode D'emploi

Before using for the first time

Transport inspection

Preparation

Additional safety measures for certain operations
Non-horizontal working position
MAB 1300
As standard, the machine is supplied with the components indica-
ted in section Components/delivery contents.
NOTE
► Inspect the delivery for completeness and obvious signs of
damage. Report an incomplete or damaged delivery to your
supplier/retailer immediately.
This section contains important instructions on required preparati-
on before starting work.
Additional safety precautions must be taken when performing the
following operations with the machine:
WARNING
Risk of injury from a falling machine.
When working in an inclined or vertical position or during
overhead work, the machine must be secured using the safety
belt (D) supplied to prevent it from falling.
► Check the safety belt for correct function before using. A
damaged safety belt must not be used. Replace a damaged
safety belt immediately.
► Attach the safety belt in such a way that the machine can fall
away from the operator if it slips.
► Lay the safety belt as taught as possible around the handle
of the machine.
► Check the secure fitting of the safety belt and lock before
starting work.
► Use the protective equipment stipulated in the section
sonal protective equipment.
Before using for the first time
Per-
47