Table des Matières
Publicité
Safety regulations
This AMMANN machine has been built according to the state of the art
and in compliance
with the pertinent technical rules. Nevertheless,
these machines can still constitute a hazard to persons and praperty if:
not used for the intended purpose,
not operated by suitably qualified and instructed personnei,
modified or converted in an impraper manner,
the pertinent safety regulations are not observed.
For this reason, any person entrusted with the operation, maintenance
or repair of the machine is obliged to read and follow the operating
instructions and particularly to observe the safety regulations.
If necessary, this must be confirmed by the signature of the company
using the machine.
Furthermore, the following must be made known and observed:
pertinent regulations for the prevention of accidents,
generally recognised safety rules,
country-specific
regulations.
Normal use
This machine is only intended for all compaction work in the fields of civil
engineering and road construction.
All ground materials such as sand, gravel, sludge, crushed stone,
asphalt and composite set! paving can be compacted.
Improper use
The machine can constitute hazards if not used by instructed personneil
or for other than the intended purpose.
Not to be used on hard concrete, hardened bituminous surfacing or
frozen soil.
Who is allowed to operate the machine?
Only suitably qualified, instructed and authorised persons over 18 years
of age may operate the machine. Maintenance and repairs, particularly
on the hydraulic system, require special knowledge and must be under-
taken only by qualified personnel.
Conversions and modifications to the machine
Unauthorised
modifications
and conversion of the machine are not
permitted for safety reasons.
Spare parts and special equipment not delivered by us are also not
appraved by usoThe installation and/or the use of such parts can also
have adetrimental
effect on the operating safety.
The manufacturer disclaims all liability for any damage resulting fram
the use of non-original parts or special equipment.
Safety information in the operating and maintenance
instructions
The following signs and designations
are used in the manual to
designate instructions of particular importance.
Ilmportant
I
Refers to special information on how to use the machine most efficiently.
I Attention
I
Refers to special
information
and/or orders and prohibitions
directed towards preventing damage.
I
Danger
I
Refers to orders and prohibitions designed to prevent injury or
extensive damage.
6
Publicité
Table des Matières
