Symbols On The Product; Symbols On The Battery And/Or On The Battery Charger - Husqvarna 520iLX Manuel D'utilisation

9. Cord
10. Battery charger
11. Operator's manual
12. Handle adjustment
13. Battery indicator button
14. Battery status
15. Warning indicator (error LED)
16. Rotation direction button
17. SavE button
18. Start and stop button
19. Power on and warning indicator (error LED)
20. Battery release buttons
21. 4 mm hex key

Symbols on the product

WARNING! This product can be
dangerous! Careless or incorrect use can
result in serious injury to the operator or
others. It is very important that you read
and understand the contents of the
operator's manual. Please read the
operator's manual carefully and make
sure you understand the instructions
before the product is used.
Use approved eye protection.
Maximum speed of the output shaft.
Keep a minimum distance of 15 m to
persons and animals during operation of
the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
756 - 007 -
The product can cause objects to eject,
which can cause injury.
Use flexible cutting wire as trimmer line.
Do not use metal cutting elements.
The arrows show the limit for the handle
position.
Protected against splashing water.
Direct current.
yyyywwxxxx The rating plate shows the serial
number. yyyy is the production year,
ww is the production week and xxxx
is the sequential number.
Symbols on the battery and/or on the
battery charger
Fail-safe transformer.
Use and keep the battery charger indoors
only.
Double insulation.
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
3