Programming Rx (Reception) Frequencies; Programming Rx (Reception) Codes (Ctcss/Dpl) - Motorola CP110 Série Guide De L'utilisateur

• If you're in 'Idle' Programming Mode and wish
to exit the 'Programming Mode', long press
the PTT button to return to normal radio
operation.
• Whenever the radio wrap around to the
beginning of the Programming Mode options
the changes will be automatically saved, even
if you turn OFF the radio.
• You can exit any Programming Mode without
saving changes (as long as the radio has not
return to the beginning) by turning the radio
OFF.
PROGRAMMING RX (RECEPTION)
FREQUENCIES
Frequencies can only be programmed into the
radio via the CPS.
38
English
PROGRAMMING RX (RECEPTION) CODES
(CTCSS/DPL)
Once you have chosen the channel you want to
program, short press the PTT button or MENU
to scroll through the options until you reach the
'Code Programming Mode'.
The radio display will show the blinking
CTCSS/DPL code as follows:
R
X
To program the desired code, scroll up/down
with the / buttons until you get the
CTCSS/DPL code value you want to set up.
Long press the PTT button to exit and save.