Charging A Standalone Battery; Charging A Standard Battery - Motorola CP110 Série Guide De L'utilisateur

Charging a Standalone Battery

To charge only the battery - at step 4, insert the
battery into the tray with the inside surface of
the battery facing the front of the charger as
shown. Ensure the slots in the battery correctly
engage in the charger
Note: Ensure that the bracket in the charger is
adjusted to the correct position for either
Standard or High capacity battery. See
"Charging a Standard Battery" on page 23.

Charging a Standard Battery

The drop-in tray charger has a removable
bracket that is adjustable depending on the
type of battery that needs to be charged. It is
designed to charge either the battery (with the
radio) or a standalone battery. The drop-in tray
charger's default position will charge a
standard battery. The following image shows
the orientation for each battery:
Adjustable bracket
Adjustable bracket
Standard
Standard
Figure 1: Identifying the Drop-In Charger's Position Before
Charging the Battery
Adjustable bracket
Adjustable bracket
High and Ultra High Capacity
High and Ultra High Capacity
23
English