Battery Type Setting; Call Tones; Scramble; Reverse Burst - Motorola CP110 Série Guide De L'utilisateur

Battery Type Setting

The CP110™ Series radio can be powered by
either Alkaline, Lithium-Ion cells or battery
pack. The battery pack can be detected at
power-up and the corresponding battery level
will be shown on the radio's display.

Call Tones

See "Programming Call Tones" on page 41.

Scramble

See "Programming Scramble L" on page 39.

Reverse Burst

Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180/240.
Notes:
• The features described are just some of the
features CPS has. There are many more
capabilities that this software offers. For more
information refer to the HELP file in the CPS
• Some of the features available with the CPS
software may vary depending on the Radio
Model.

CLONING RADIOS

You can clone CP110™ Series radio profiles
from one radio (the 'Source' radio) to a second
radio (the 'Target' radio) by using any one of
these 3 methods:
• One Multi Unit Charger (optional accessory)
• Two Single Unit Chargers and a Radio-to-
Radio cloning cable (optional accessory)
• the CPS
49
English