Programming Features; Entering Programming Mode - Motorola CP110 Série Guide De L'utilisateur

PROGRAMMING
FEATURES

ENTERING PROGRAMMING MODE

To enter 'Programming Mode', press and hold
both the PTT button and the SB1 button
simultaneously for three seconds, while turning
ON the radio. A unique tone will sound,
indicating that the radio has entered
'Programming Mode' and the radio LED will
signal a green heartbeat. Once the radio enters
the 'Programming Mode', which defaults to
'Idle' Programming Mode, the LED will blink a
green heartbeat.
Whenever you enter 'Programming Mode' the
PROG icon will be displayed and the current
channel aliasing name will be blinking to
indicate that you can select the channel you
want to program.
You can scroll up/down to select the different
channels by pressing the
In 'Programming Mode' your radio is capable of
setting values for each channel by moving
between the different programming modes
available: CTCSS/DPL codes (Interference
Eliminator Code), Scramble, Bandwidth,
Maximum Channels, Call Tone, Microphone
Gain and Scan. Frequencies are programmed
via the CPS only.
• To move along the different Programming
Selection Modes without saving changes,
short press the PTT button or MENU button.
• To save changes long press the PTT button.
The radio will return to 'Idle' Programming
Mode.
/ buttons.
37
English